Ref. 9738 dSCR STACKER

9738 dSCR STACKER

2 SATELLITE INPUTS (INCL 1 TERRESTRIAL INPUT), 1 OUTPUT WITH 2 USER BANDS


The dSCR Stacker is the perfect solution to upgrade an old single satellite STB system to an dSCR-compatible dual input receiver (PVR) or 2 separate dSCR-compatible set-top boxes. The advantage of using the 9738 is that no additional cable is needed to connect the second tuner. The product stacks both transponders on 1 cable.


  • application: 1 Twin LNB, 2 ports of a multiswitch, 2 Twin LNBs connected to Multiswitch (ref. 9920)
  • powers the LNB or multiswitch from the STB or from an additional power supply
  • power with Ref. 2460 Power Supply 
  • supports the following standards: EN50494/SCR standard (DiSEqC 1.0) & EN50607/dCSS/dSCR standard (DiSEqC 2.0)

Specifications

9738
Inputs - 2 ports Satellite, combined with Terrestrial on port 1
Input Frequency MHz Userbands 1-2: 1076 - 1178 MHz 
or Userbands 3-4: 1280 - 1382 MHz 
or Userbands 5-6: 1284 - 1400 MHz 
or Userbands 7-8: 1210 - 1420 MHz
STB Output Frequency MHz 5 – 862 / 950 – 2150
dCSS/dSCR outputs - 1 SCR
dCSS/dSCR output connector Ohm 75 F type (Female)
dCSS/dSCR UBs - 2 on SCR output
dCSS/dSCR output level dBm -23
Satellite input power level dBm -45 to -15
Return loss dB >=8 (Typ 12)
Tap loss SCR dB Not applicable, AGC (automatic Gain control)
Terrestrial/Cable loss dB -7 typical
Band and polarity selection - DiSEqC 1.0 (unidirectional) 
DiSEqC 2.0 (bidirectional) 
Standard EN 50494 (SCD) 
Standard EN 50607 (SCD 2)
Max DC current consumption 
SCR port
W <4,0  
DC power pass from STB to input ports V 13/18/22kHz 100mA max per port
From DC power port to input ports V 13/18/22kHz 500mA max combined
Power supply - From STB or power inserter
Power (2460 available separately) A 500mA max, 20V
Dimensions mm 90x85x40

Documentation